Product Finder (copy 2)

Product Finder - Controller & Drivers

Drive Type

Per favore conferma la tua selezione
Number of axes

Per favore conferma la tua selezione
Interface

Per favore conferma la tua selezione
Device Type

Per favore conferma la tua selezione

75 risultati


Novità

C-887.4xx1 Hexapod Motion Controller

Hexapod Controller for Industrial Applications
  • For industrial hexapods
  • safety functions with SIL 3 (certification pending)
  • integration in automation network thanks to EtherCAT interface
Novità

C-887.5xx0 Hexapod Motion Controller

Compact Benchtop Device for Controlling 6-Axis Parallel Kinematics
  • Supports various drives
  • TCP/IP for network-based control and maintenance
  • integration into automation systems thanks to EtherCAT interface
Novità

E-881 BIX Motion Controller

For Piezoelectric BIX Inertia Drives, TCP/IP, USB Interfaces
Novità

E-713.IxxD0 • IxxI0 Digital Interfaces for E-713 Motion Controller

For Digital Input and Output Signals
  • 24 V nominal voltage for industrial automation
  • Programmable by command
Novità

E-713.IxxA0 Analog Interfaces for E-713 Motion Controller

For Analog Input and Output Signals
  • High-resolution analog inputs and outputs
  • Extremely fast thanks to high bandwidth
  • Configurable via parameter setting
Novità

E-713.S Sensor Processing for E-713 Motion Controller

For Capacitive Sensors, Strain Gauge Sensors (SGS), and Encoders
  • High bandwidth up to 10 kHz for capacitive sensors and SGS
  • Sensor box for encoder connection via SPI
  • Digital signal transmission over longer distances
Novità

E-713.Rx Housings for E-713 Motion Controller

For Flexible Configuration with Modules
  • For use in control cabinet or as benchtop device
  • Power supply combinations for greatest flexibility
  • 19" 4 RU with 17 slots
  • PCI Express 3.0 for internal bus
  • Active cooling, EMI filter
Novità

E-713.IxxS0 SPI Interfaces for E-713 Motion Controller

For SPI Slaves and SPI Master
  • Control via SPI master using 32-bit data word
  • Sensor connection via SPI
  • Configurable via parameter setting
Novità

E-713.M1 Master Module for E-713 Motion Controller

For Motion Control and Communication
  • PC-based, multithreaded CPU
  • Up to 50 kHz control frequency
  • Extensive software package
Novità

E-713.DxxPxL • DxxPxM Amplifiers for E-713 Motion Controller

For Piezo-Based Drives With or Without Sensors
  • Highly stable 20-bit D/A converters
  • For PICMA piezo actuators, PICMAWalk drives, and NEXLINE® drives
  • Encoder input via BiSS C interface
Novità

E-713.DxxDxL Motor Driver for E-713 Motion Controller

For DC Servo Motors
  • For PI positioning systems with DC motors
  • High-speed encoder input up to 60 MHz
  • BiSS C interface for absolute measuring sensors
Novità

G-902.RxI ACS Driver Module

For 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor
  • ACS driver module for 4 drive axes, as benchtop device or control cabinet module, directly compatible with positioners from PI.
Novità

G-902.RxE Motion Controller

Integrated Driver for up to 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor
  • ACS motion controller with integrated ACS driver for 2 or 4 drive axes, directly compatible with positioners from PI.
Novità

A-811.CE PIglide Motion Controller for One Axis

For Stages with Direct Drive, TCP/IP Interface
  • Motion controller for motor stages with air bearings. High end for industrial precision automation - linear and rotary motion.

E-709.1C1L Compact and Cost-Optimized Digital Piezo Controller

For Capacitive Sensors, 1 Axis, with Monitoring Functionality
  • For piezo-based single-axis nanopositioning systems with capacitive sensors. Output voltage -30 to 130 V. Temperature stable in less than 10 minutes.

C-414 PIMag® Motion Controller

Control of Position and Velocity for Voice Coil Drives
  • Control: Position, Velocity
  • 1 &amp
  • 2 Axis
  • Real-time SPI interface
  • Servo update rate to 10kHz

Selection according to application